Wireless monitoring for open-pit mines

Connect your pit instruments.
Access readings remotely.

Ackcio Beam acquires readings from supported instruments across benches, ramps and pit walls. Self-Healing Mesh uses alternative communication paths where available as site conditions change.

  • Supported instrument interfaces
  • Self-Healing Mesh
  • Remote access and configuration
Open-pit workings at Jwaneng mine in Botswana
Jwaneng mine · Botswana

Mining deployments

Wireless acquisition.
On the ground.

Satellite view of the monitoring network at Jwaneng mine
Jwaneng mine monitoring network

Open-pit · Botswana

Jwaneng diamond mine

Borehole extensometers and smart cables connect to Ackcio Digital Nodes along a retaining wall. Repeater nodes and a gateway provide the wireless acquisition pathway.

Instruments
Borehole extensometers and smart cables
Acquisition
Digital nodes, repeaters and gateway
Discuss a similar monitoring setup
Mike Jackson of Ramjack Technology Solutions
“They are taking away that difficulty, and making it easier to get reliable, real-time data.”
Mike Jackson, President & CEO · Ramjack Technology Solutions

From measurement to review

How Ackcio fits your monitoring setup

The instrument output, reading interval, site layout and data destination determine the system configuration.

Ackcio Gateway assembly02 / GATEWAY

Collect the readings

The gateway receives data from the Beam network. Plan its location, power and backhaul around the pit and the required workflow.

Explore the Gateway
Ackcio software screens03 / SOFTWARE

Review and integrate

Manage the network and sensor data through Snape. Send readings to compatible third-party platforms or your own software using supported API or FTP integrations. Confirm the data format, destination and access requirements for your project.

Explore Snape

Work with the instruments you use

Select the node by the instrument’s electrical output: analogue, vibrating wire or a supported digital interface. The instrument category alone does not determine compatibility.

Check output type, excitation, power, channel requirements and reading interval for each model. Ackcio sensors and compatible third-party instruments can form part of the same monitoring plan.

Fit your existing data workflow

Choose where engineers will review the readings: Snape, a compatible monitoring platform or an internal system. Plan the gateway connection and integration around that destination.

Confirm supported interfaces and data formats with the project team before specifying the system.

The wireless differentiator

Self-Healing Mesh

Pit geometry and site conditions can affect radio links. Ackcio Beam automatically selects communication paths, using alternative routes where available.

Mesh supports radio-path resilience. It cannot repair cut sensor cables, failed instruments or power loss.

How Ackcio Mesh works
Open-pit example showing a blocked red radio link and alternative green routes between sensor nodes and the gateway.
Open-pit example: the red link is blocked; green links show alternative radio paths. Available routes depend on network design and site conditions.

Choose the radio system deliberately. Beam Mesh and TM-L LoRa are distinct systems. Confirm the radio, gateway and acquisition requirements for the selected device.

What can you monitor?

Six areas. A connected view.

Keep core measurements in view, then explore the instruments and acquisition requirements for each area.

Six monitoring areas across an open-pit mine
Open-pit monitoring: Weather and blasting
01 / Weather and blasting

Monitoring area 01

Weather and blasting

What weather and blasting conditions coincide with the wall’s response?

Relate the wall’s response to rainfall, weather and blasting activity.

Weather at the pit
Rainfall, wind and temperature provide environmental context.
Blast vibration
Specify suitable vibration instrumentation and acquisition equipment for the required dynamic response.
Rim and waste-dump response
Tilt and displacement measurements support assessment of selected locations.

Relevant products and acquisition

Mesh TiltmeterDiscuss blast acquisition
Instruments and measurement considerations

Typical instruments / data
Weather station · Rain gauge · Vibration sensor · Tiltmeter

Weather stations and vibration instruments may be third-party products. Blast vibration needs a verified sensor and acquisition pathway with appropriate bandwidth, sampling rate and synchronisation; it is not supported by every node.

Open-pit monitoring: Wall and bench movement
02 / Wall and bench movement

Monitoring area 02

Wall and bench movement

How is displacement changing across the wall and benches?

Track changes at the crest, on benches and through the pit wall.

Subsurface horizontal displacement
In-place inclinometers and appropriately installed arrays measure displacement profiles at depth.
Cracks and joints
Crackmeters measure relative opening or closing across selected discontinuities.
Vertical displacement: settlement and heave
Select settlement sensors or appropriately oriented extensometers for ramps and haul roads. Tiltmeters measure angular change separately.

Relevant products and acquisition

GeoArrayCrackmeterMesh Tiltmeter
Instruments and measurement considerations

Typical instruments / data
GeoArray · In-place inclinometer · Tiltmeter · Extensometer · Crackmeter

Tiltmeters measure angular change, not direct displacement or settlement. Select the measurement axis, reference point and installation method for each instrument.

Open-pit monitoring: Water and pore pressure
03 / Water and pore pressure

Monitoring area 03

Water and pore pressure

How are pore pressure and water levels changing?

Read water conditions alongside displacement and rainfall.

Pore water pressure
Piezometers measure pressure at selected depths behind the pit wall.
Sumps and dewatering bores
Suitable water-level instruments record changes in water level.
Rainfall and drainage
Review rainfall, pressure and relevant flow measurements together to investigate changing water conditions.

Relevant products and acquisition

PiezometerInstrument interfaces
Instruments and measurement considerations

Typical instruments / data
Piezometer · Water-level sensor · Rain gauge · Flow meter

A piezometer measures pressure at its installed location. Correlate readings with rainfall, drainage and displacement; pressure alone does not establish slope stability.

Open-pit monitoring: Support and structures
04 / Support and structures

Monitoring area 04

Support and structures

How are instrumented supports and structures responding?

Measure how selected supports and structures respond.

Rock bolts and anchors
Suitable load cells measure loads at instrumented support locations.
Retaining walls and foundations
Strain gauges measure local strain in ramp retaining walls, crusher bases and conveyor foundations.
Contact pressure, cracks and tilt
Pressure cells, crackmeters and tiltmeters address distinct measurements where specified.

Relevant products and acquisition

Load cellVibrating wire sensors
Instruments and measurement considerations

Typical instruments / data
Load cell · Strain gauge · Pressure cell · Crackmeter · Tiltmeter

Strain is a local measurement, not a direct stress value. Interpreting loads or structural response requires the installation geometry, calibration and engineering model.

Open-pit monitoring: Movement at depth
05 / Movement at depth

Monitoring area 05

Movement at depth

At which instrumented depths is displacement occurring?

Investigate where displacement occurs through the wall.

Horizontal displacement profile
Vertical in-place inclinometers and suitable arrays help locate changes along the borehole.
Shear zones and weak layers
Measurements across suspected clay bands or faults provide evidence for engineering interpretation.
Displacement along a borehole
Single- and multi-point borehole extensometers measure relative displacement along their installed axes; vertical installations can address settlement and heave.

Relevant products and acquisition

GeoArrayInstrument interfaces
Instruments and measurement considerations

Typical instruments / data
GeoArray · In-place inclinometer · ShapeArray · Borehole extensometer

Inclinometers and arrays provide displacement profiles; extensometers measure relative displacement along their installed axes. Movement data alone does not identify material properties or prove slope stability.

Open-pit monitoring: Data health
06 / Data health

Monitoring area 06

Data health

Is an unusual reading linked to the ground, the instrument or its data pathway?

Review the measurement and the condition of its data pathway.

Instrument checks
Investigate unexpected readings, disconnected sensors and damaged local cables.
Context for spikes
Review unusual values alongside blasting, electrical interference and field observations.
Network and power
Use available battery, signal and missed-reading information to investigate gaps and connectivity changes.

Relevant products and acquisition

SnapeSelf-Healing Mesh
Instruments and measurement considerations

Typical instruments / data
Battery voltage · Signal strength · Missed readings · Available node and sensor diagnostics

Available diagnostics depend on the device and configuration. Check sensor connections, power and field conditions as well as radio paths when investigating gaps or spikes.

Between readings

A connected record between site visits.

Inspections and surveys remain essential. Automated acquisition adds instrument readings at configured intervals, helping engineers review trends alongside rainfall, blasting and excavation activity.

01

Reduce routine collection trips

Bring readings from supported instruments to the gateway without visiting each monitoring point for every reading.

02

Adapt the acquisition layout

Plan node, repeater and gateway positions around changing benches, obstructions and access routes.

03

Make readings available for review

Connect data collection to a defined review and escalation process, with responsibility for investigating missing or unusual readings.

Start with one asset

Scope the measurements.
Then build the network.

01

Define the question

Select the wall, ramp or support structure. Specify parameters, measurement locations, reading intervals and engineering responsibilities.

02

Confirm the pathway

Match instrument outputs, power and acquisition needs to devices. Survey radio routes and agree gateway location, backhaul and commissioning checks.

03

Validate and extend

Check measurements, network behaviour and the review workflow before expanding to additional locations.

Build a site-specific business case

Compare manual collection effort with instruments, hardware, installation, connectivity and ongoing maintenance. Use the actual site scope and access requirements.

Keep interpretation with the team

Combine readings with inspections, surveys and geological information. The responsible engineers define thresholds and operational responses.

Common questions

Before you specify a system.

Can existing instruments connect to Ackcio?

Check each instrument’s output, excitation, power, channel requirements and reading interval against the supported node interface. Ackcio sensors and compatible third-party instruments can be used within the same monitoring plan.

How does the network handle changing pit layouts?

Nodes select alternative communication paths where available. Survey and revisit the layout as benches, equipment or structures change; adjust node, repeater or gateway positions where required.

Does Mesh remove the need for sensor cables?

The radio network carries readings between nodes and the gateway. Instruments may still connect locally by cable. Mesh cannot repair cable damage, failed instruments or loss of power.

Is TM-L LoRa part of the Beam Mesh network?

TM-L uses LoRa and has a different radio architecture from Beam Mesh. Specify the device and gateway combination for the required workflow; do not assume Mesh routing applies to TM-L.

Can the same node capture ground displacement and blast vibration?

Do not assume it can. Blast vibration has specific bandwidth, sampling and timing requirements. Validate the instrument and acquisition pathway separately from slower geotechnical readings.

Can readings alone demonstrate slope stability?

No. Instrument readings describe measured parameters at specific locations. Interpret them with the geological model, inspections, surveys and engineering assessment.

Open-pit mine benches at Jwaneng

Want To Know More About How Ackcio Beam Can Be Used to Wirelessly Monitor Open-pit Mines?

Request Demo